Arnitel has excellent molecular adhesion to polar polymers such as
polycarbonate, polyvinyl chloride, styrenics such as ABS, etc. The high
chemical bonding creates excellent adhesion between the Arnitel and the polar
polymer surfaces. For crystalline polymers, adhesion of Arnitel on the
component is achieved by increasing the inlay temperature of the component
over which the overmolding is to be done.
2 K molding is also used to enhance the appeal of applications. Both
pre-coloring and masterbatches can be used for coloring Arnitel molded
components. When using masterbatch, excellent part appearance is achieved with
Arnitel-based or universal masterbatches.
;){kind=small}
