Many products in the international range conform to the quality standards set
by Lloyd’s register of shipping, Det Norske Veritas (DNV) or RINA. Grades are
available suitable for brush, roller or spray application, either clear or
pre-pigmented in a wide range of colour options. We also offer a customized
colour matching service. Depending on the requirements of the end application,
you can choose from standard orthophthalic grades, corrosion resistant
isophthalic or high performing ISO/NPG grades.
Neogel NPG
Neogel NPG (IsoNeopentylglycol) gelcoats will give
maximum protection in all water contact applications such as boats, swimming
pools, kitchen worktops and sanitary ware. A series of grades are available
for manual or automatic application each having superior weathering resistance
to surface yellowing and chalking, combined with excellent long term
resistance to water immersion and osmotic blistering. Other distinguishing
characteristics include superior air release, elasticity and mechanical
properties. Wherever high performance is required, in terms of toughness,
durability or corrosion protection, then Neogel NPG are the gelcoats to
specify.
Grade names:
-
Neogel 8373 (Spray grade)
-
Neogel 8375 (Brush grade)
Neogel ISO
Neogel ISO gelcoats are high quality products
designed to give excellent resistance to weather and corrosion. They are
formulated isophthalic polyester resins. Isophthalic based structural resins
have a long service history in tough environments and our gelcoats based on
the same chemistry have performed equally well. Neogel ISO is easily applied
with excellent leveling properties and minimal sag on vertical surfaces. It is
available in brush or spray form. ISO gelcoats also show excellent resistance
to weathering and can be used in a broad range of applications. Neogel ISO
2000 is approved by the Lloyd’s Register of Shipping and by the Water Research
Council for potable water applications.
Grade names:
-
Neogel 2000 (Brush grade)
-
Neogel 2500 (Spray grade, fast cure)
Neogel Flex
If you need a tough, flexible gelcoat with good
resistance to flexure and impact, then Neogel FLEX is the product to use.
Neogel FLEX is a medium reactivity isophthalic gelcoat, fast curing over a
wide range of temperatures and is suitable for general moulding applications
where rapid mould turnaround is required. It also shows excellent weathering
resistance and is easy to apply.
Grade name:
-
Neogel 6000 (brush grade)
Neogel ISI
As the name suggests Neogel ISI gelcoats are easy to
apply in brush or spray form and are ideally suited to general purpose
applications in transportation, furniture or industrial sectors. All Neogel
ISI gelcoats are formulated with a mixture of isophthalic and orthophthalic
resins, are DNV approved, and are available in an extensive range of versions
and colours.
Grade names:
-
Neogel 8378 (Spray type)
-
Neogel 8379 (Brush type)
Neogel IND
Neogel IND (industrial) series orthophthalic
gelcoats can be used for moulded surfaces which are to be painted afterwards.
They are easily applied by brush or spray and exhibit good opacity, low fibre
print through and freedom from porosity. Neogel IND is easily sanded and
provides an ideal surface for painting. Excellent adhesion is achieved, even
without primer.
Grades available:
-
Neogel 8370 (Brush grade)
-
Neogel 8371 (Spray grade)
Neogel CS
Neogel CS gelcoats have been developed specifically
for the manufacture of GRP moulds. They are characterised by their excellent
resistance to styrene, high strength and long lasting, high gloss finish. When
moulds are properly prepared (suitable back up resin and design), Neogel CS
can help reduce wear or cracking, even after extensive use. Self-release,
spray and brush versions of the popular, pre-accelerated tooling gelcoat are
available. Neogel CS should be backed up with a high heat distortion Synolite
resin.
Grades available:
-
Neogel 8395 (Brush grade)
-
Neogel 8396 (Spray grade)
Neogel FR
Neogel FR is a specially formulated range of ISO/NPG
resins designed for use in the construction, building and transportation
industries. Neogel FR can be spray applied using conventional equipment or
hand applied by brush or roller. Excellent flame-retardant properties, make
Neogel FR an ideal gelcoat to use with DSM’s fire retardant range of resins to
produce composite systems which meet recognized fire safety standards.
Mouldings made from Neogel FR have an attractive, semi-gloss finish with good
weatherability and mechanical properties.
Grades available :
-
Neogel 8391( Brush / spray )
Neogel : part of the system solution for the Marine Industry
System solutions for the marine industry.
