Stanyl®: Most cost effective solution for PCB mounted components with wall thickness down to 0.06mm

• Unmatched combination of flow and toughness
  - fills molds easily with low residual internal stresses, low tendency to warp
  - high weld line strength for trouble free pin (metal) insertion
  - enables complicated designs even with very small parts
• High flow leads to more cavities per tool
• SMT capable, also for lead-free solder processes

---

Global capability supports low cost manufacturing programs

• Development engineers specialized in PCB technologies in all regions to support R&D phase
• Global teams to facilitate multi-regional component development and end-user approvals
• Local manufacture in China, USA, Japan and Europe for logistical flexibility and local support

Stanyl® is the registered trademark of Royal DSM N.V.

Microswitches: key extra advantages of Stanyl compared to other resins such as PPA, PA9T and LCP

• Very low reject rates throughout manufacturing and assembly
• Tolerates higher thermal and mechanical stress during pin insertion giving much lower rejects
• Use of recycle of up to 30% possible (vs. zero recycle) means greater resin cost effectiveness

PCB Component holders: key additional advantages

• Low injection pressures and low warp grade significantly reduces rejects due to warpage
• High toughness and excellent weld line strength reduce weld line cracks due to stresses arising in assembly