×

자동차 분야의 DSM

당사의 혁신적인 고성능 플라스틱은 자동차 관련 다양한 기술적 과제를 해결하기 위해 개발된 것입니다. 이 페이지들을 살펴보고 업계 전문가, 과학자 및 엔지니어가 고객과 협력하여 차세대 솔루션을 개발하는 방법에 대해 자세히 알아보십시오.

차체 패널용 고성능 플라스틱

당사 솔루션 검색하기

Structural Parts with ForTii® Ace

Automotive | Body Structural Parts

Up to 50% weight reduction in comparison with metal;Part integration and increased design freedom;Easy and robust processing;Potential applications: engine mount/bracket, transmission parts, structural oilpan, timing chain cover, actuator and EPS housing, etc.

Boots and Bellows

Automotive | Body Structural Parts

Arnitel® TPC allows for 20-40% lighter solutions than rubber and also more cost effective solutions than rubber; Arnitel® TPC allows for highly reliable solutions due to its high temperature resistance (more temperature resistance than TPV) and its good resistance against chemicals and greases

Engine mounts

Automotive | Body Structural Parts

Akulon® (UltraFlow) PA6 yields up to 50% weight reduction and a NVH advantage versus metal; Akulon® (UltraFlow) PA6 allows for reliable solutions due to its good compatibility with the expansion rubber/foam applied on the moulded parts; Akulon® UltraFlow PA6 50%GF allows for a more cost effective solution than PA66 50%GF

Front End Modules

Automotive | Body Structural Parts

Akulon® PA6 allows for reliable soulutions due to more temperature resistance than PP and better surface appearance than PA66; Akulon® PA6 allows for more cost effective solutions than PA66; Akulon® UltraFlow allows for even more cost effectiveness, since it enables 25% thinner walls and up to 25 % faster moulding cycle times

Structural Reinforcements

Automotive | Body Structural Parts

Akulon® (UltraFlow) PA6 yields up to 50% weight reduction and a NVH advantage versus metal; Akulon® (UltraFlow) PA6 allows for reliable solutions due to its high temperature resistance and due to its good compatibility with the expansion rubber/foam applied on the moulded parts

Suspension System Spring Seats

Automotive | Body Structural Parts

Akulon® PA6 allows for light weight solutions versus metal (up to 50% weight reduction); Akulon® PA6 K224-PG8 allows for reliable solutions due to its combination of excellent toughness with high stiffness

Suspension System Top Mounts

Automotive | Body Structural Parts

Akulon® (UltraFlow) PA6 and Stanyl® PA46 yield up to 50% weight reduction and a NVH advantage versus metal; Akulon® (UltraFlow) PA6 and Stanyl® PA46 allow for reliable solutions due to its good compatibility with the expansion rubber/foam applied on the moulded parts; Akulon® UltraFlow PA6 50%GF allows for a more cost effective solution than PA66 50%GF; Stanyl® PA46 allows for a more cost effective solution than PPA and PPS

Top Mounts

Automotive | Body Structural Parts

Akulon® (UltraFlow) PA6 yields up to 50% weight reduction and a NVH advantage versus metal; Akulon® (UltraFlow) PA6 allows for reliable solutions due to its good compatibility with the expansion rubber/foam applied on the moulded parts; Akulon® UltraFlow PA6 50%GF allows for a more cost effective solution than PA66 50%GF

Torque Rods

Automotive | Body Structural Parts

Akulon® (UltraFlow) PA6 yields up to 50% weight reduction and a NVH advantage versus metal; Akulon® (UltraFlow) PA6 allows for reliable solutions due to its good compatibility with the expansion rubber/foam applied on the moulded parts; Akulon® UltraFlow PA6 50%GF allows for a more cost effective solution than PA66 50%GF

월간 뉴스레터 구독

플라스틱, 신제품 및 이벤트에 대한 최신 소식을 구독하시려면 아래에 이메일 주소를 남겨주십시오.

사업자 : 디에스엠엔지니어링머티리얼즈코리아(주)
대  표 : 문수현
사업자등록번호 : 120-81-85618
주  소 : 서울시 영등포구 여의대로 24 전국경제인연합회회관 9층
대표번호 : 02-2055-5780   팩스 : 02-2055-5790

This site uses cookies to store information on your computer.

추가 정보