PPS- Xytron™

Xytron은 3가지 핵심 장점에 기여하는 선형 폴리페닐렌 설파이드에 기반한 고성능 플라스틱 컴파운드입니다.
 

  • 최대 240°C의 열노화 성능
  • 높은 온도에서의 내화학성
  • 치수 안정성

Xytron™ 살펴보기

Xytron은 극히 우수한 내화학성, 치수 안정성, 본질적 난연성을 나타냅니다. 또한 240~260°C 범위의 연속 사용 온도(CUT)와 함께 90°C의 유리 전이 온도까지 높은 강성을 제공합니다. Xytron은 다양한 자동차, E&E 및 전문 산업 등 광범위한 어플리케이션에 매우 적합합니다.

Xytron™ 포트폴리오 하이라이트

내가수분해성

이 소재의 종류는 가혹한 화학물질이나 높은 열에 노출되는 동안에도 치수 안정성을 유지해야 하는 어플리케이션에 가장 적합합니다..

더 보기

식품 접촉 및 식수

이 소재의 종류는 NSF, KTW, WRAS, ACS를 비롯해 글로벌 식수 승인을 받았고, 또한 식품 접촉 어플리케이션에 대한 FDA의 요건을 준수합니다. 고압, 온수 어플리케이션용으로 이상적인 이들 소재는 최대 95°C의 온도에서 사용할 수 있습니다.

더 보기

높은 충격 내성

이 종류의 소재를 사용하면 높은 내충격성을 필요로 하거나 온도 변화가 잦은 어플리케이션을 만들 수 있습니다. 이들 그레이드는 표준 PPS 그레이드에 일반적인 취성 문제를 해결하도록 설계되었습니다.

모든 그레이드 보기

 

특성

내가수분해성

PPS와 유리는 모두 내가수분해성이 양호한 것으로 알려져 있습니다. 그러나 가수분해 과정 동안 유리와 PPS의 접점은 유리 보강 PPS 화합물의 약점이 됩니다. 우수한 결합 기술 덕분에 DSM G4080HR은 경쟁사의 소재를 능가합니다. 보유 강도는 135°C에서 3,000시간의 노화 후에도 여전히 초기 값의 80%로 유지됩니다.

AFM 차트에서 오른쪽 그림을 보면, 물/글리콜 노화 시험 전에는 PPS 폴리머와 유리 간에 G4080HR과 경쟁사 샘플 모두의 결합이 양호하다는 것을 확인할 수 있습니다. 3,000시간의 물/글리콜 노화 후에, 경쟁사 샘플의 접점에서는 간극이 관찰되지만, G4080HR의 경우에는 거의 보이지 않는다는 것을 관찰할 수 있습니다. 이는 G4080HR의 유지력이 경쟁사 샘플보다 높다는 것을 보여줍니다.

장기 열노화 성능

매우 안정적인 화학 결합으로 인해 PPS는 매우 우수한 열노화 성능을 보여줍니다. 초기 노화 공정 동안 페닐렌 고리가 탄소 층을 형성할 것입니다. 이는 후에 내부층이 산화되지 않도록 보호하게 됩니다. 이는 오른쪽에 보이는 것처럼 G4010T의 열노화 곡선으로 쉽게 검증할 수 있습니다. 150°C에서는 인장 강도의 감소가 제한적이라는 것이 관찰되며, 230°C에서는 감소 폭이 좀 더 크긴 하나 여전히 제한적입니다. 심지어는 6,000시간 동안 230°C에서 노화된 후에도 Xytron G4010T는 여전히 >60%의 인장 강도 유지율을 보여줍니다.

치수 안정성

PPS 화학 구조에는 친수성 그룹이 없기 때문에 PPS는 수분 흡수가 거의 제로입니다. G4020DW-FC의 시편이 72시간 동안 85°C 물에 침수되더라도 흡수된 물은 0.2%에 불과하며 이는 치수 증가가 흐름 방향으로는 약 0.03%, 횡 방향으로는 0.05%에 불과하다는 것입니다.

고온에서의 크리프 저항성

PPS의 고강성 때문에 Xytron은 고온에서도 매우 우수한 크리프 성능을 보여줍니다. 오른쪽에 그림으로 표시된 G4024T 크리프 곡선에서 보면, 20Mpa의 부하가 있는 실온에서 1,000시간 동안 연신율의 변화가 제한적임을 보여줍니다. 150°C에서도 연신율은 20Mpa의 부하에서 1,000시간 후 0.6%에 불과합니다다.

고순도

Xytron 선형 PPS를 사용하면 고순도 수준으로 인해 침출이 매우 적습니다. 또한 물 관리 및 수소 연료 전지에 광범위하게 사용될 수 있습니다.

열 전도성

다양한 유형의 첨가제를 사용함으로써 양호한 전기적 특성과 치수 안정성에 더해 장기적인 고온 저항과 내가수분해 성능이 열 전도성 소재에 결합될 수 있습니다.

가장 인기 있는 Xytron™ 그레이드

Xytron™ G4024T

40% Glass Reinforced

"Xytron™ is a high performance plastic compound of DSM Engineering Plastics, which is based on PPS (polyphenylene sulphide)."

"Xytron™ offers extremely good chemical resistance, dimensional stability, intrinsic flame retardancy and high stiffness."

"Because of its outstanding properties, Xytron™ contributes to an excellent performance in many different applications."

  • 40% Glass Reinforced
  • Excellent Mold Release
  • Flame Retardant

Xytron™ G3010E

30% Glass Reinforced

"Xytron™ is a high performance plastic compound of DSM Engineering Plastics, which is based on PPS (polyphenylene sulphide)."

"Xytron™ offers extremely good chemical resistance, dimensional stability, intrinsic flame retardancy and high stiffness."

"Because of its outstanding properties, Xytron™ contributes to an excellent performance in many different applications."

  • 30% Glass Reinforced
  • High Impact
  • Food Contact Quality
  • Drinking Water Grade
  • "Drinking Water Contact Grade"

Xytron™ G3080R

30% Glass Reinforced

"Xytron™ is a high performance plastic compound of DSM Engineering Plastics, which is based on PPS (polyphenylene sulphide)."

"Xytron™ offers extremely good chemical resistance, dimensional stability, intrinsic flame retardancy and high stiffness."

"Because of its outstanding properties, Xytron™ contributes to an excellent performance in many different applications."

  • 30% Glass Reinforced
  • Flame Retardant
  • Excellent Mold Release
  • Low Flash

Xytron™ M6510A

65% Glass/Mineral Reinforced

"Xytron™ is a high performance plastic compound of DSM Engineering Plastics, which is based on PPS (polyphenylene sulphide)."

"Xytron™ offers extremely good chemical resistance, dimensional stability, intrinsic flame retardancy and high stiffness."

"Because of its outstanding properties, Xytron™ contributes to an excellent performance in many different applications."

  • 65% Glass/Mineral Reinforced
  • Flame Retardant
  • Excellent Dimensional Stability
  • "Excellent dimensional stability"

Xytron™ G4020DW-FC

40% Glass Reinforced

"Xytron™ is a high performance plastic compound of DSM Engineering Plastics, which is based on PPS (polyphenylene sulphide)."

"Xytron™ offers extremely good chemical resistance, dimensional stability, intrinsic flame retardancy and high stiffness."

"Because of its outstanding properties, Xytron™ contributes to an excellent performance in many different applications."

  • 40% Glass Reinforced
  • Drinking Water Grade
  • Food Contact Quality
  • Flame Retardant
  • "Drinking Water Contact Grade"

주요 어플리케이션

Thermostat housing

Automotive |

Benefits Best long term performance in water/glycol Outstanding surface finish Reduced production costs due to early demolding (short cycle time) Application requirements Water/glycol resistance Feasibility of complex parts Excellent surface finish Dimensional stability High weldline strength Material properties Low flash Water/glycol resistant Rigid Outstanding surface quality Dimensional stability Easy to mold – easy processing High impact resistance

Alternator bridges

Automotive |

Application requirements Thermal stability Dimensional stability Less flash creation Surface finish Stiffness/strength Material properties Rigidity Best flow properties High impact resistance Outstanding surface quality Dimensional stability Easy to mold – easy processing

Engine block heater for electric generators

Energy |

Engine heaters heat engine coolant to allow for easy engine start-up regardless of ambient temperature.The engine block heater is required to operate in continuous contact with coolant at temperatures between 35 and 50°C.

Brushholders (electro motors)

Automotive | e-Drivetrain HV E-motors

Stanyl® PA46 also used in connectors, e-motor parts, bobbins, sensors, fuse boxes. Thermoconductive Stanyl XL-T (P968A) in use as well; ForTii® PA4T and Xytron™ PPS also materials to be used in electromotor applications

Xytron™ 더 알아보기

  • 이륜 혁명: 전기 스쿠터 이용에 따른 대기 오염 저감

    전기 오토바이와 스쿠터는 대기 오염 저감 전략에서 핵심 요소이며 대부분의 시민들에게 전기 자동차 구입 비용을 마련하는 것이 어려운 도시에서는 더욱 그렇습니다. 전기 스쿠터의 주행거리와 수명을 개선하려면 내구성이 좋은 경량의 난연 소재가 필요합니다. 날로 확장되고 있는 이 시장에서 DSM의 엔지니어링 머티리얼즈 포트폴리오는 필수적 입니다.