디에스엠 엔지니어링 머티리얼즈

ko_KR

자동차 분야의 DSM

당사의 혁신적인 고성능 플라스틱은 자동차 관련 다양한 기술적 과제를 해결하기 위해 개발된 것입니다. 이 페이지들을 살펴보고 업계 전문가, 과학자 및 엔지니어가 고객과 협력하여 차세대 솔루션을 개발하는 방법에 대해 자세히 알아보십시오.

차체 패널

차체 패널용 고성능 플라스틱

당사 솔루션 검색하기

Structural Parts with ForTii® Ace

Automotive | Body | Structural Parts

Up to 50% weight reduction in comparison with metal;Part integration and increased design freedom;Easy and robust processing;Potential applications: engine mount/bracket, transmission parts, structural oilpan, timing chain cover, actuator and EPS housing, etc.

Boots and Bellows

Automotive | Body | Structural Parts

Arnitel® TPC allows for 20-40% lighter solutions than rubber and also more cost effective solutions than rubber; Arnitel® TPC allows for highly reliable solutions due to its high temperature resistance (more temperature resistance than TPV) and its good resistance against chemicals and greases

Front End Modules

Automotive | Body | Structural Parts

Akulon® PA6 allows for reliable soulutions due to more temperature resistance than PP and better surface appearance than PA66; Akulon® PA6 allows for more cost effective solutions than PA66; Akulon® UltraFlow allows for even more cost effectiveness, since it enables 25% thinner walls and up to 25 % faster moulding cycle times

Structural Reinforcements

Automotive | Body | Structural Parts

Akulon® (UltraFlow) PA6 yields up to 50% weight reduction and a NVH advantage versus metal; Akulon® (UltraFlow) PA6 allows for reliable solutions due to its high temperature resistance and due to its good compatibility with the expansion rubber/foam applied on the moulded parts

Suspension System Spring Seats

Automotive | Body | Structural Parts

Akulon® PA6 allows for light weight solutions versus metal (up to 50% weight reduction); Akulon® PA6 K224-PG8 allows for reliable solutions due to its combination of excellent toughness with high stiffness

Suspension System Top Mounts

Automotive | Body | Structural Parts

Akulon® (UltraFlow) PA6 and Stanyl® PA46 yield up to 50% weight reduction and a NVH advantage versus metal; Akulon® (UltraFlow) PA6 and Stanyl® PA46 allow for reliable solutions due to its good compatibility with the expansion rubber/foam applied on the moulded parts; Akulon® UltraFlow PA6 50%GF allows for a more cost effective solution than PA66 50%GF; Stanyl® PA46 allows for a more cost effective solution than PPA and PPS

본 사이트는 귀하의 컴퓨터에 정보를 저장하는 데 쿠키를 사용합니다.

추가 정보 x