To offer a drop-in solution to overcome the PA66 shortage, we developed an alternative material: The Akulon® IG series is a portfolio of material grades made by combining the strength of PA6 and PA46 – two materials that are fully independent of the Adiponitrile/hexamethyldiamine supply.
Engine cooling was yesterday, today thermal management is key
It is not a new realization that all the heat that a motor and its systems produce must also be dissipated again. But the specific requirements have become much more complex. In modern high-tech drives, for example, the average operating temperature must be permanently low or, in particular, regulated. Increased temperatures can affect the exhaust gas level, which in turn can lead to faulty engine control. For engines that generate little heat themselves, the system must heat the occupants in winter and cool them in summer. Not to mention that perfectly functioning engine temperature control can result in CO2 savings of up to 4%. All of these factors require an intelligent thermal management system. Added to this is the demand for higher performance and efficiency with less installation space.
Many components, many types of engineering plastics. So far.
Since a long time, we are focusing on developing and optimizing these system requirements. Thermostats, and more recently thermal management modules found in the modern combustion engines, provide this temperature regulating function. These components consist of plastic-made housings required to sustain significant long-term mechanical loads as well as being resistant to chemical attacks from the coolant (water-glycol). Plastic components that carry the water-glycol in these systems need to offer properties required to cope with the long-term exposure to this medium. In case of EV’s (Electric Vehicle), the temperature control (i.e. of the battery system) is also of paramount importance, both for efficiency and safety reasons.
While classic designs are developed for extreme heat and vibration loads, they often have little ability to withstand the unusual situations that most engines face during their lifetime.
The uncompromising answer with perfect balance.
ForTii MX15HR is our new semi-aromatic polyamide for automotive cooling applications (such as thermostat housings, valves and hose barbs), based on DSM’s PA4T chemistry. It is the only PPA that gives the optimum balance in stiffness, strength and impact resistance after exposure to coolant medium (water-glycol) of the lifetime. It is designed for a cooler architecture that not only delivers performance and durability, but also provides protection against extreme conditions. ForTii MX15HR stands for weight and cost reduction - with up to 30% higher strength at 120 °C and up to 40% higher stability at 120 °C compared to PPA.
Two-wheeler technical know-how: DSM’s materials provide the strength and durability that electric scooters need
A number of e-scooter components require specialized materials to ensure safe and reliable performance. DSM’s portfolio includes materials designed to meet the specific needs of these applications.
How to survive the structural PA66 shortage
Under current market conditions, the supply chain for polyamide 66 (PA66) is under pressure. With the surge in demand for developing lightweight vehicles and pushing the connectivity revolution forward, supply is too concentrated to reliably meet global demand.