To offer a drop-in solution to overcome the PA66 shortage, we developed an alternative material: The Akulon® IG series is a portfolio of material grades made by combining the strength of PA6 and PA46 – two materials that are fully independent of the Adiponitrile/hexamethyldiamine supply.
People of DSM Engineering Plastics: Mike Guetling
We recently sat down with Mike Guetling, senior technical service engineer for DSM Engineering Plastics, to learn more about his role at DSM and discuss the importance of continuing education.
1. Tell us a little bit about what you do at DSM.
I have a bachelor’s degree from Indiana State University and began my career in plastics in 1978. For the last 26 years of my career, I have been a technical service engineer for DSM Engineering Plastics at the Evansville, Indiana, location.
In his spare time, Mike Guetling is an avid cyclist and enjoys hiking, fishing and spending time with his family.
I go out in the field and resolve issues customers are having with DSM material solutions. I also work with customers on developing new programs, making recommendations on materials or molding, and possibly CAE and FEA work if perceived beneficial. I support all materials in the DSM portfolio, along with injection molding, blow molding and extrusion technology.
I also provide technical training to customers’ processing technicians and material handlers. These training programs are done at the customers facility, and custom designed around topics they want to learn about. I have many topics in my toolbox I can discuss. In most cases, they are designed to cover the basics for successful results.
2. What has been the best part of your role as senior technical service manager at DSM Engineering Plastics?
The best part about working for DSM is that I get to do what I have an interest in, resolving technical issues and supporting our customers. DSM has always focused on my strengths and supported further development. I think all companies need to promote development programs at all levels.
3. Why do you think it’s important to take continuing education courses and/or seminars?
It’s important for anyone to continue learning and stay up to date about new technologies and advancements in materials sciences. If you don’t do that you become stagnant. You send a message that you don’t need further education or training. Through continuing my education, I not only benefit, but so do my customers. I have completed several seminars and secondary classes relating to topics in the material sciences and business management.
I work mostly with people on a production floor. At the end of the day I want those people to be able to figure out a problem. I put myself in a position where they get the credit for figuring out a problem. Many time’s I have two or three hours to troubleshoot a problem, so in that time frame I need to put my best foot forward and make people feel like I want them to succeed and solve a problem.
Think of continuing education as a win-win for you and your company, or customer.
4. What are some of the most memorable experiences you have had working at DSM?
The people I have worked with have been great—they have been supportive of me and have a lot of confidence in me. I will always cherish that. Also, I have satisfaction from seeing programs that I’ve been involved in completed. For example, in 2010, we commercialized the Fuel Lock material and that was a big achievement. Also, DSM asked me to get involved in suction-blow molding, and I worked with Russ Bloomfield, application development engineer, to commercialize suction blow molded air ducts for the automotive industry.
6. What advice would you give to a young person considering a career in the industry?
My first suggestion to a person interested in the materials sciences field is to get with a company and find a mentor. I had three great mentors when I started in plastics. Those guys taught me a lot of what I know. Probably 60-70% of my knowledge was learned processing plastics. DSM taught me about plastics from a molecular level, and the use of additive and reinforcers in plastics.
Also, students will need to take a two or four-year materials sciences program. Once they graduate they will need to continue educating themselves—you should never stop learning and need to stay up to date. Companies today want key technical people to understand materials sciences, scientific molding and the newest technologies and innovations. These companies are always looking for employees with the rights skills set.
To learn about another Person of DSM Engineering Plastics: Paula Kruger, click here.
Two-wheeler technical know-how: DSM’s materials provide strength & durability that electric scooters need
A number of e-scooter components require specialized materials to ensure safe and reliable performance. DSM’s portfolio includes materials designed to meet the specific needs of these applications.
Building a more sustainable high-performance tire
DSM's Arnitel family of thermoplastic elastomers is helping tire manufacturers "reinvent the wheel" by developing non-pneumatic tires.