DSMエンジニアリングプラスチックス

ja_JP

自動車分野におけるDSM

私たちの革新的な高性能プラスチックは、自動車分野の様々な技術的課題に対応するよう開発されています。私たちの産業エキスパート、科学者、エンジニアが、どのようにしてお客さまと協力しながら次世代のソリューションを開発しているかをご覧ください。

ボディパネル

ボディパネル用高性能プラスチック

私たちのソリューションを見る

Structural Parts with ForTii® Ace

Automotive | Body | Structural Parts

Up to 50% weight reduction in comparison with metal;Part integration and increased design freedom;Easy and robust processing;Potential applications: engine mount/bracket, transmission parts, structural oilpan, timing chain cover, actuator and EPS housing, etc.

Boots and Bellows

Automotive | Body | Structural Parts

Arnitel® TPC allows for 20-40% lighter solutions than rubber and also more cost effective solutions than rubber; Arnitel® TPC allows for highly reliable solutions due to its high temperature resistance (more temperature resistance than TPV) and its good resistance against chemicals and greases

Engine mounts

Automotive | Body | Structural Parts

Akulon® (UltraFlow) PA6 yields up to 50% weight reduction and a NVH advantage versus metal; Akulon® (UltraFlow) PA6 allows for reliable solutions due to its good compatibility with the expansion rubber/foam applied on the moulded parts; Akulon® UltraFlow PA6 50%GF allows for a more cost effective solution than PA66 50%GF

Front End Modules

Automotive | Body | Structural Parts

Akulon® PA6 allows for reliable soulutions due to more temperature resistance than PP and better surface appearance than PA66; Akulon® PA6 allows for more cost effective solutions than PA66; Akulon® UltraFlow allows for even more cost effectiveness, since it enables 25% thinner walls and up to 25 % faster moulding cycle times

Structural Reinforcements

Automotive | Body | Structural Parts

Akulon® (UltraFlow) PA6 yields up to 50% weight reduction and a NVH advantage versus metal; Akulon® (UltraFlow) PA6 allows for reliable solutions due to its high temperature resistance and due to its good compatibility with the expansion rubber/foam applied on the moulded parts

Suspension System Spring Seats

Automotive | Body | Structural Parts

Akulon® PA6 allows for light weight solutions versus metal (up to 50% weight reduction); Akulon® PA6 K224-PG8 allows for reliable solutions due to its combination of excellent toughness with high stiffness

Suspension System Top Mounts

Automotive | Body | Structural Parts

Akulon® (UltraFlow) PA6 and Stanyl® PA46 yield up to 50% weight reduction and a NVH advantage versus metal; Akulon® (UltraFlow) PA6 and Stanyl® PA46 allow for reliable solutions due to its good compatibility with the expansion rubber/foam applied on the moulded parts; Akulon® UltraFlow PA6 50%GF allows for a more cost effective solution than PA66 50%GF; Stanyl® PA46 allows for a more cost effective solution than PPA and PPS

Top Mounts

Automotive | Body | Structural Parts

Akulon® (UltraFlow) PA6 yields up to 50% weight reduction and a NVH advantage versus metal; Akulon® (UltraFlow) PA6 allows for reliable solutions due to its good compatibility with the expansion rubber/foam applied on the moulded parts; Akulon® UltraFlow PA6 50%GF allows for a more cost effective solution than PA66 50%GF

Torque Rods

Automotive | Body | Structural Parts

Akulon® (UltraFlow) PA6 yields up to 50% weight reduction and a NVH advantage versus metal; Akulon® (UltraFlow) PA6 allows for reliable solutions due to its good compatibility with the expansion rubber/foam applied on the moulded parts; Akulon® UltraFlow PA6 50%GF allows for a more cost effective solution than PA66 50%GF

このサイトはクッキーを使用し、お客様のコンピューターに情報を保存しています。

詳細はこちら x